|
 |
Primary aluminium
Shapes:
- Ingots
- T-bars
- Coating Slabs
- Rolling Slabs
- Billets
- Wire bars
Grades:
- А5, А5Е, А6, А7, A7E, А7E, A8, A85, А95, А97, А98, 3N8, A99, A995, 4N6
Standards:
- GOST
- International Standards and Technical Specifications (TU).
Please contact our sales team who will be happy to discuss your particular requirements with you.
Primary foundry alloys
Heneken, s.r.o. also supplies foundry alloys for the automotive manufacturing industry. The product quality and high metal purity are of paramount importance, which is why many of the europeans's finest alloy products are made with raw material from Heneken, s.r.o.
Foundry alloys are supplied in ingot shapes, sizes, strontium modified and unmodified, and are grouped according to international designations. The alloys produced include: A356.2, ALSi7Mg, ALSi9Mg, ALSi10Mg, ALSi11Mg, ALSiCu etc.
Please contact our sales team who will be happy to discuss your particular requirements with you.
Secondary aluminium
Heneken, s.r.o. is currently one of the Central European's largest suppliers of secondary alloys. Consistency and quality of our products are of paramount importance, explaining why products delivered by Heneken, s.r.o. are so popular.
Other norms: European standards (EN AB), GOST, ADC according to customer specification
| DIN EN 1706 |
EN AC-46000EN AC-Al Si9Cu3(Fe) |
EN AC-47100EN AC-Al Si12Cu1(Fe) |
EN AC-44300EN AC-Al Si12(Fe) |
EN AC-43400EN AC-Al Si10Mg(Fe) |
| min. |
max. |
min. |
max. |
min. |
max. |
min. |
max. |
| Si |
8,0 |
11,0 |
10,5 |
13,5 |
10,5 |
13,5 |
9,0 |
11,0 |
| Fe |
(0,6) |
1,3
(1,1) |
(0,6) |
1,3
(1,1) |
(0,45) |
1,0
(0,9) |
(0,45) |
1,0
(0,9) |
| Cu |
2,0 |
4,0 |
0,7 |
1,2 |
|
0,1
(0,08) |
|
0,1
(0,08) |
| Mn |
|
0,55 |
|
0,55 |
|
0,55 |
|
0,55 |
| Mg |
0,05
(0,15) |
0,55 |
|
0,35 |
|
- |
0,2
(0,25) |
0,5 |
| Cr |
|
0,15 |
|
0,1 |
|
- |
|
- |
| Ni |
|
0,55 |
|
0,3 |
|
- |
|
0,15 |
| Zn |
|
1,2 |
|
0,55 |
|
0,15 |
|
0,15 |
| Pb |
|
0,35 |
|
0,2 |
|
- |
|
0,15 |
| Sn |
|
0,25 |
|
0,1 |
|
- |
|
0,05 |
| Ti |
|
0,25
(0,20) |
|
0,20
(0,15) |
|
0,15 |
|
0,2
(0,15) |
| Each other |
|
0,05 |
|
0,05 |
|
0,05 |
|
0,05 |
| Total others |
|
0,25 |
|
0,25 |
|
0,25 |
|
0,15 |
For complete range of Heneken aluminium alloys please view this pdf file.
Please contact our sales team who will be happy to discuss your particular requirements with you.
DE-OX (Deoxidation aluminium)
Deoxidation aluminium consists of alloys with a high share of aluminium (usually exceeding 95 %) in the form of pyramids, cones, ingots or wire rod which are used to remove free oxygen from the liquid steel.
Heneken, s.r.o. supplies many major steel mills in Europe with high quality DEOX products.
Please contact our sales team who will be happy to discuss your particular requirements with you.
Wire rod
Parameters:
- Diameter 9, 9.5, 14, 19 and 23 mm, grade АКЛП-ПТ-5е, АКЛП-Т1-5е
- Diameter 11.5 and 14 mm, grade АКЛП АВ
- Diameter 9 and 14 mm, grade А 99
Standards:
- GOST 13843-78
- International Standards and Technical Specifications (TU).
Please contact our sales team who will be happy to discuss your particular requirements with you.
Silicon metal
Heneken, s.r.o. is among Europe's largest suppliers of silicon metal to the aluminium industry. Heneken, s.r.o. offers a complete range of silicon metal grades for use in the environmentally important secondary aluminium industry.
Standard offer of Heneken Silicon Metal
Impurities in %
| Grade |
Si |
Fe |
Al |
Ca |
| 553 |
98.50 |
0.50 |
0.50 |
0.30 |
| 441 |
99.00 |
0.40 |
0.40 |
0.10 |
| 3303 |
99.00 |
0.30 |
0.30 |
0.03 |
| 2202 |
99.00 |
0.20 |
0.20 |
0.02 |
| 1101 |
99.20 |
0.10 |
0.10 |
0.01 |
Typical sizing 10-100 mm 90 % minimum
Various chemical analyses, sizings and packing forms are available on demand. For more information about Heneken silicon metal please view this pdf brochure.
Please contact our sales team who will be happy to discuss your particular requirements with you.
Magnesium diecasting alloys
Heneken, s.r.o. magnesium diecasting alloys AZ91, AM50, AM60 are supplied to european foundries for the production of components used in the automotive, electronics and telecommunication industries. The chemical composition of each diecasting alloy from Heneken, s.r.o. is based upon the standard ASTM specification.
| Compostition max.% |
AZ91 |
AM60 |
AM50 |
| Mg |
Base |
Base |
Base |
| Al |
8.5–9.5 |
5.6–6.4 |
4.5–5.3 |
| Mn |
0.17–0.40 |
0.26–0.50 |
0.28–0.50 |
| Zn |
0.45–0.9 |
0.20 |
0.20 |
| Si |
0.05 |
0.05 |
0.05 |
| Cu |
0.025 |
0.008 |
0.008 |
| Ni |
0.001 |
0.001 |
0.001 |
| Fe |
0.004 |
0.004 |
0.004 |
| Others |
0.01 |
0.01 |
0.01 |
Please contact our sales team who will be happy to discuss your particular requirements with you.
|
